/* $OpenBSD: flexdef.h,v 1.7 2004/02/03 21:20:17 espie Exp $ */ /* flexdef - definitions file for flex */ /*- * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Vern Paxson. * * The United States Government has rights in this work pursuant * to contract no. DE-AC03-76SF00098 between the United States * Department of Energy and the University of California. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE. */ /* @(#) $Header: /cvs/src/usr.bin/lex/flexdef.h,v 1.7 2004/02/03 21:20:17 espie Exp $ (LBL) */ #include #include #include "config.h" #ifdef __TURBOC__ #define HAVE_STRING_H 1 #define MS_DOS 1 #ifndef __STDC__ #define __STDC__ 1 #endif #pragma warn -pro #pragma warn -rch #pragma warn -use #pragma warn -aus #pragma warn -par #pragma warn -pia #endif #ifdef HAVE_STRING_H #include #else #include #endif #ifdef HAVE_SYS_TYPES_H #include #endif #ifdef STDC_HEADERS #include #else #ifdef HAVE_MALLOC_H #include #endif #endif /* As an aid for the internationalization patch to flex, which * is maintained outside this distribution for copyright reasons. */ #define _(String) (String) /* Always be prepared to generate an 8-bit scanner. */ #define CSIZE 256 #define Char unsigned char /* Size of input alphabet - should be size of ASCII set. */ #ifndef DEFAULT_CSIZE #define DEFAULT_CSIZE 128 #endif #ifndef PROTO #ifdef __STDC__ #define PROTO(proto) proto #else #define PROTO(proto) () #endif #endif #ifdef VMS #ifndef __VMS_POSIX #define unlink remove #define SHORT_FILE_NAMES #endif #endif #ifdef MS_DOS #define SHORT_FILE_NAMES #endif /* Maximum line length we'll have to deal with. */ #define MAXLINE 2048 #ifndef MIN #define MIN(x,y) ((x) < (y) ? (x) : (y)) #endif #ifndef MAX #define MAX(x,y) ((x) > (y) ? (x) : (y)) #endif #ifndef ABS #define ABS(x) ((x) < 0 ? -(x) : (x)) #endif /* ANSI C does not guarantee that isascii() is defined */ #ifndef isascii #define isascii(c) ((c) <= 0177) #endif #define true 1 #define false 0 #define unspecified -1 /* Special chk[] values marking the slots taking by end-of-buffer and action * numbers. */ #define EOB_POSITION -1 #define ACTION_POSITION -2 /* Number of data items per line for -f output. */ #define NUMDATAITEMS 10 /* Number of lines of data in -f output before inserting a blank line for * readability. */ #define NUMDATALINES 10 /* transition_struct_out() definitions. */ #define TRANS_STRUCT_PRINT_LENGTH 14 /* Returns true if an nfa state has an epsilon out-transition slot * that can be used. This definition is currently not used. */ #define FREE_EPSILON(state) \ (transchar[state] == SYM_EPSILON && \ trans2[state] == NO_TRANSITION && \ finalst[state] != state) /* Returns true if an nfa state has an epsilon out-transition character * and both slots are free */ #define SUPER_FREE_EPSILON(state) \ (transchar[state] == SYM_EPSILON && \ trans1[state] == NO_TRANSITION) \ /* Maximum number of NFA states that can comprise a DFA state. It's real * big because if there's a lot of rules, the initial state will have a * huge epsilon closure. */ #define INITIAL_MAX_DFA_SIZE 750 #define MAX_DFA_SIZE_INCREMENT 750 /* A note on the following masks. They are used to mark accepting numbers * as being special. As such, they implicitly limit the number of accepting * numbers (i.e., rules) because if there are too many rules the rule numbers * will overload the mask bits. Fortunately, this limit is \large/ (0x2000 == * 8192) so unlikely to actually cause any problems. A check is made in * new_rule() to ensure that this limit is not reached. */ /* Mask to mark a trailing context accepting number. */ #define YY_TRAILING_MASK 0x2000 /* Mask to mark the accepting number of the "head" of a trailing context * rule. */ #define YY_TRAILING_HEAD_MASK 0x4000 /* Maximum number of rules, as outlined in the above note. */ #define MAX_RULE (YY_TRAILING_MASK - 1) /* NIL must be 0. If not, its special meaning when making equivalence classes * (it marks the representative of a given e.c.) will be unidentifiable. */ #define NIL 0 #define JAM -1 /* to mark a missing DFA transition */ #define NO_TRANSITION NIL #define UNIQUE -1 /* marks a symbol as an e.c. representative */ #define INFINITY -1 /* for x{5,} constructions */ #define INITIAL_MAX_CCLS 100 /* max number of unique character classes */ #define MAX_CCLS_INCREMENT 100 /* Size of table holding members of character classes. */ #define INITIAL_MAX_CCL_TBL_SIZE 500 #define MAX_CCL_TBL_SIZE_INCREMENT 250 #define INITIAL_MAX_RULES 100 /* default maximum number of rules */ #define MAX_RULES_INCREMENT 100 #define INITIAL_MNS 2000 /* default maximum number of nfa states */ #define MNS_INCREMENT 1000 /* amount to bump above by if it's not enough */ #define INITIAL_MAX_DFAS 1000 /* default maximum number of dfa states */ #define MAX_DFAS_INCREMENT 1000 #define JAMSTATE -32766 /* marks a reference to the state that always jams */ /* Maximum number of NFA states. */ #define MAXIMUM_MNS 31999 /* Enough so that if it's subtracted from an NFA state number, the result * is guaranteed to be negative. */ #define MARKER_DIFFERENCE (MAXIMUM_MNS+2) /* Maximum number of nxt/chk pairs for non-templates. */ #define INITIAL_MAX_XPAIRS 2000 #define MAX_XPAIRS_INCREMENT 2000 /* Maximum number of nxt/chk pairs needed for templates. */ #define INITIAL_MAX_TEMPLATE_XPAIRS 2500 #define MAX_TEMPLATE_XPAIRS_INCREMENT 2500 #define SYM_EPSILON (CSIZE + 1) /* to mark transitions on the symbol epsilon */ #define INITIAL_MAX_SCS 40 /* maximum number of start conditions */ #define MAX_SCS_INCREMENT 40 /* amount to bump by if it's not enough */ #define ONE_STACK_SIZE 500 /* stack of states with only one out-transition */ #define SAME_TRANS -1 /* transition is the same as "default" entry for state */ /* The following percentages are used to tune table compression: * The percentage the number of out-transitions a state must be of the * number of equivalence classes in order to be considered for table * compaction by using protos. */ #define PROTO_SIZE_PERCENTAGE 15 /* The percentage the number of homogeneous out-transitions of a state * must be of the number of total out-transitions of the state in order * that the state's transition table is first compared with a potential * template of the most common out-transition instead of with the first * proto in the proto queue. */ #define CHECK_COM_PERCENTAGE 50 /* The percentage the number of differences between a state's transition * table and the proto it was first compared with must be of the total * number of out-transitions of the state in order to keep the first * proto as a good match and not search any further. */ #define FIRST_MATCH_DIFF_PERCENTAGE 10 /* The percentage the number of differences between a state's transition * table and the most similar proto must be of the state's total number * of out-transitions to use the proto as an acceptable close match. */ #define ACCEPTABLE_DIFF_PERCENTAGE 50 /* The percentage the number of homogeneous out-transitions of a state * must be of the number of total out-transitions of the state in order * to consider making a template from the state. */ #define TEMPLATE_SAME_PERCENTAGE 60 /* The percentage the number of differences between a state's transition * table and the most similar proto must be of the state's total number * of out-transitions to create a new proto from the state. */ #define NEW_PROTO_DIFF_PERCENTAGE 20 /* The percentage the total number of out-transitions of a state must be * of the number of equivalence classes in order to consider trying to * fit the transition table into "holes" inside the nxt/chk table. */ #define INTERIOR_FIT_PERCENTAGE 15 /* Size of region set aside to cache the complete transition table of * protos on the proto queue to enable quick comparisons. */ #define PROT_SAVE_SIZE 2000 #define MSP 50 /* maximum number of saved protos (protos on the proto queue) */ /* Maximum number of out-transitions a state can have that we'll rummage * around through the interior of the internal fast table looking for a * spot for it. */ #define MAX_XTIONS_FULL_INTERIOR_FIT 4 /* Maximum number of rules which will be reported as being associated * with a DFA state. */ #define MAX_ASSOC_RULES 100 /* Number that, if used to subscript an array, has a good chance of producing * an error; should be small enough to fit into a short. */ #define BAD_SUBSCRIPT -32767 /* Absolute value of largest number that can be stored in a short, with a * bit of slop thrown in for general paranoia. */ #define MAX_SHORT 32700 /* Declarations for global variables. */ /* Variables for symbol tables: * sctbl - start-condition symbol table * ndtbl - name-definition symbol table * ccltab - character class text symbol table */ struct hash_entry { struct hash_entry *prev, *next; char *name; char *str_val; int int_val; } ; typedef struct hash_entry **hash_table; #define NAME_TABLE_HASH_SIZE 101 #define START_COND_HASH_SIZE 101 #define CCL_HASH_SIZE 101 extern struct hash_entry *ndtbl[NAME_TABLE_HASH_SIZE]; extern struct hash_entry *sctbl[START_COND_HASH_SIZE]; extern struct hash_entry *ccltab[CCL_HASH_SIZE]; /* Variables for flags: * printstats - if true (-v), dump statistics * syntaxerror - true if a syntax error has been found * eofseen - true if we've seen an eof in the input file * ddebug - if true (-d), make a "debug" scanner * trace - if true (-T), trace processing * nowarn - if true (-w), do not generate warnings * spprdflt - if true (-s), suppress the default rule * interactive - if true (-I), generate an interactive scanner * caseins - if true (-i), generate a case-insensitive scanner * lex_compat - if true (-l), maximize compatibility with AT&T lex * do_yylineno - if true, generate code to maintain yylineno * useecs - if true (-Ce flag), use equivalence classes * fulltbl - if true (-Cf flag), don't compress the DFA state table * usemecs - if true (-Cm flag), use meta-equivalence classes * fullspd - if true (-F flag), use Jacobson method of table representation * gen_line_dirs - if true (i.e., no -L flag), generate #line directives * performance_report - if > 0 (i.e., -p flag), generate a report relating * to scanner performance; if > 1 (-p -p), report on minor performance * problems, too * backing_up_report - if true (i.e., -b flag), generate "lex.backup" file * listing backing-up states * C_plus_plus - if true (i.e., -+ flag), generate a C++ scanner class; * otherwise, a standard C scanner * long_align - if true (-Ca flag), favor long-word alignment. * use_read - if true (-f, -F, or -Cr) then use read() for scanner input; * otherwise, use fread(). * yytext_is_array - if true (i.e., %array directive), then declare * yytext as a array instead of a character pointer. Nice and inefficient. * do_yywrap - do yywrap() processing on EOF. If false, EOF treated as * "no more files". * csize - size of character set for the scanner we're generating; * 128 for 7-bit chars and 256 for 8-bit * yymore_used - if true, yymore() is used in input rules * reject - if true, generate back-up tables for REJECT macro * real_reject - if true, scanner really uses REJECT (as opposed to just * having "reject" set for variable trailing context) * continued_action - true if this rule's action is to "fall through" to * the next rule's action (i.e., the '|' action) * in_rule - true if we're inside an individual rule, false if not. * yymore_really_used - whether to treat yymore() as really used, regardless * of what we think based on references to it in the user's actions. * reject_really_used - same for REJECT */ extern int printstats, syntaxerror, eofseen, ddebug, trace, nowarn, spprdflt; extern int interactive, caseins, lex_compat, do_yylineno; extern int useecs, fulltbl, usemecs, fullspd; extern int gen_line_dirs, performance_report, backing_up_report; extern int C_plus_plus, long_align, use_read, yytext_is_array, do_yywrap; extern int csize; extern int yymore_used, reject, real_reject, continued_action, in_rule; extern int yymore_really_used, reject_really_used; /* Variables used in the flex input routines: * datapos - characters on current output line * dataline - number of contiguous lines of data in current data * statement. Used to generate readable -f output * linenum - current input line number * out_linenum - current output line number * skelfile - the skeleton file * skel - compiled-in skeleton array * skel_ind - index into "skel" array, if skelfile is nil * yyin - input file * backing_up_file - file to summarize backing-up states to * infilename - name of input file * outfilename - name of output file * did_outfilename - whether outfilename was explicitly set * prefix - the prefix used for externally visible names ("yy" by default) * yyclass - yyFlexLexer subclass to use for YY_DECL * do_stdinit - whether to initialize yyin/yyout to stdin/stdout * use_stdout - the -t flag * input_files - array holding names of input files * num_input_files - size of input_files array * program_name - name with which program was invoked * * action_array - array to hold the rule actions * action_size - size of action_array * defs1_offset - index where the user's section 1 definitions start * in action_array * prolog_offset - index where the prolog starts in action_array * action_offset - index where the non-prolog starts in action_array * action_index - index where the next action should go, with respect * to "action_array" */ extern int datapos, dataline, linenum, out_linenum; extern FILE *skelfile, *yyin, *backing_up_file; extern const char *skel[]; extern int skel_ind; extern char *infilename, *outfilename; extern int did_outfilename; extern char *prefix, *yyclass; extern int do_stdinit, use_stdout; extern char **input_files; extern int num_input_files; extern char *program_name; extern char *action_array; extern int action_size; extern int defs1_offset, prolog_offset, action_offset, action_index; /* Variables for stack of states having only one out-transition: * onestate - state number * onesym - transition symbol * onenext - target state * onedef - default base entry * onesp - stack pointer */ extern int onestate[ONE_STACK_SIZE], onesym[ONE_STACK_SIZE]; extern int onenext[ONE_STACK_SIZE], onedef[ONE_STACK_SIZE], onesp; /* Variables for nfa machine data: * current_mns - current maximum on number of NFA states * num_rules - number of the last accepting state; also is number of * rules created so far * num_eof_rules - number of <> rules * default_rule - number of the default rule * current_max_rules - current maximum number of rules * lastnfa - last nfa state number created * firstst - physically the first state of a fragment * lastst - last physical state of fragment * finalst - last logical state of fragment * transchar - transition character * trans1 - transition state * trans2 - 2nd transition state for epsilons * accptnum - accepting number * assoc_rule - rule associated with this NFA state (or 0 if none) * state_type - a STATE_xxx type identifying whether the state is part * of a normal rule, the leading state in a trailing context * rule (i.e., the state which marks the transition from * recognizing the text-to-be-matched to the beginning of * the trailing context), or a subsequent state in a trailing * context rule * rule_type - a RULE_xxx type identifying whether this a ho-hum * normal rule or one which has variable head & trailing * context * rule_linenum - line number associated with rule * rule_useful - true if we've determined that the rule can be matched */ extern int current_mns, current_max_rules; extern int num_rules, num_eof_rules, default_rule, lastnfa; extern int *firstst, *lastst, *finalst, *transchar, *trans1, *trans2; extern int *accptnum, *assoc_rule, *state_type; extern int *rule_type, *rule_linenum, *rule_useful; /* Different types of states; values are useful as masks, as well, for * routines like check_trailing_context(). */ #define STATE_NORMAL 0x1 #define STATE_TRAILING_CONTEXT 0x2 /* Global holding current type of state we're making. */ extern int current_state_type; /* Different types of rules. */ #define RULE_NORMAL 0 #define RULE_VARIABLE 1 /* True if the input rules include a rule with both variable-length head * and trailing context, false otherwise. */ extern int variable_trailing_context_rules; /* Variables for protos: * numtemps - number of templates created * numprots - number of protos created * protprev - backlink to a more-recently used proto * protnext - forward link to a less-recently used proto * prottbl - base/def table entry for proto * protcomst - common state of proto * firstprot - number of the most recently used proto * lastprot - number of the least recently used proto * protsave contains the entire state array for protos */ extern int numtemps, numprots, protprev[MSP], protnext[MSP], prottbl[MSP]; extern int protcomst[MSP], firstprot, lastprot, protsave[PROT_SAVE_SIZE]; /* Variables for managing equivalence classes: * numecs - number of equivalence classes * nextecm - forward link of Equivalence Class members * ecgroup - class number or backward link of EC members * nummecs - number of meta-equivalence classes (used to compress * templates) * tecfwd - forward link of meta-equivalence classes members * tecbck - backward link of MEC's */ /* Reserve enough room in the equivalence class arrays so that we * can use the CSIZE'th element to hold equivalence class information * for the NUL character. Later we'll move this information into * the 0th element. */ extern int numecs, nextecm[CSIZE + 1], ecgroup[CSIZE + 1], nummecs; /* Meta-equivalence classes are indexed starting at 1, so it's possible * that they will require positions from 1 .. CSIZE, i.e., CSIZE + 1 * slots total (since the arrays are 0-based). nextecm[] and ecgroup[] * don't require the extra position since they're indexed from 1 .. CSIZE - 1. */ extern int tecfwd[CSIZE + 1], tecbck[CSIZE + 1]; /* Variables for start conditions: * lastsc - last start condition created * current_max_scs - current limit on number of start conditions * scset - set of rules active in start condition * scbol - set of rules active only at the beginning of line in a s.c. * scxclu - true if start condition is exclusive * sceof - true if start condition has EOF rule * scname - start condition name */ extern int lastsc, *scset, *scbol, *scxclu, *sceof; extern int current_max_scs; extern char **scname; /* Variables for dfa machine data: * current_max_dfa_size - current maximum number of NFA states in DFA * current_max_xpairs - current maximum number of non-template xtion pairs * current_max_template_xpairs - current maximum number of template pairs * current_max_dfas - current maximum number DFA states * lastdfa - last dfa state number created * nxt - state to enter upon reading character * chk - check value to see if "nxt" applies * tnxt - internal nxt table for templates * base - offset into "nxt" for given state * def - where to go if "chk" disallows "nxt" entry * nultrans - NUL transition for each state * NUL_ec - equivalence class of the NUL character * tblend - last "nxt/chk" table entry being used * firstfree - first empty entry in "nxt/chk" table * dss - nfa state set for each dfa * dfasiz - size of nfa state set for each dfa * dfaacc - accepting set for each dfa state (if using REJECT), or accepting * number, if not * accsiz - size of accepting set for each dfa state * dhash - dfa state hash value * numas - number of DFA accepting states created; note that this * is not necessarily the same value as num_rules, which is the analogous * value for the NFA * numsnpairs - number of state/nextstate transition pairs * jambase - position in base/def where the default jam table starts * jamstate - state number corresponding to "jam" state * end_of_buffer_state - end-of-buffer dfa state number */ extern int current_max_dfa_size, current_max_xpairs; extern int current_max_template_xpairs, current_max_dfas; extern int lastdfa, *nxt, *chk, *tnxt; extern int *base, *def, *nultrans, NUL_ec, tblend, firstfree, **dss, *dfasiz; extern union dfaacc_union { int *dfaacc_set; int dfaacc_state; } *dfaacc; extern int *accsiz, *dhash, numas; extern int numsnpairs, jambase, jamstate; extern int end_of_buffer_state; /* Variables for ccl information: * lastccl - ccl index of the last created ccl * current_maxccls - current limit on the maximum number of unique ccl's * cclmap - maps a ccl index to its set pointer * ccllen - gives the length of a ccl * cclng - true for a given ccl if the ccl is negated * cclreuse - counts how many times a ccl is re-used * current_max_ccl_tbl_size - current limit on number of characters needed * to represent the unique ccl's * ccltbl - holds the characters in each ccl - indexed by cclmap */ extern int lastccl, *cclmap, *ccllen, *cclng, cclreuse; extern int current_maxccls, current_max_ccl_tbl_size; extern Char *ccltbl; /* Variables for miscellaneous information: * nmstr - last NAME scanned by the scanner * sectnum - section number currently being parsed * nummt - number of empty nxt/chk table entries * hshcol - number of hash collisions detected by snstods * dfaeql - number of times a newly created dfa was equal to an old one * numeps - number of epsilon NFA states created * eps2 - number of epsilon states which have 2 out-transitions * num_reallocs - number of times it was necessary to realloc() a group * of arrays * tmpuses - number of DFA states that chain to templates * totnst - total number of NFA states used to make DFA states * peakpairs - peak number of transition pairs we had to store internally * numuniq - number of unique transitions * numdup - number of duplicate transitions * hshsave - number of hash collisions saved by checking number of states * num_backing_up - number of DFA states requiring backing up * bol_needed - whether scanner needs beginning-of-line recognition */ extern char nmstr[MAXLINE]; extern int sectnum, nummt, hshcol, dfaeql, numeps, eps2, num_reallocs; extern int tmpuses, totnst, peakpairs, numuniq, numdup, hshsave; extern int num_backing_up, bol_needed; void *allocate_array PROTO((int, size_t)); void *reallocate_array PROTO((void*, int, size_t)); void *flex_alloc PROTO((size_t)); void *flex_realloc PROTO((void*, size_t)); void flex_free PROTO((void*)); #define allocate_integer_array(size) \ (int *) allocate_array( size, sizeof( int ) ) #define reallocate_integer_array(array,size) \ (int *) reallocate_array( (void *) array, size, sizeof( int ) ) #define allocate_int_ptr_array(size) \ (int **) allocate_array( size, sizeof( int * ) ) #define allocate_char_ptr_array(size) \ (char **) allocate_array( size, sizeof( char * ) ) #define allocate_dfaacc_union(size) \ (union dfaacc_union *) \ allocate_array( size, sizeof( union dfaacc_union ) ) #define reallocate_int_ptr_array(array,size) \ (int **) reallocate_array( (void *) array, size, sizeof( int * ) ) #define reallocate_char_ptr_array(array,size) \ (char **) reallocate_array( (void *) array, size, sizeof( char * ) ) #define reallocate_dfaacc_union(array, size) \ (union dfaacc_union *) \ reallocate_array( (void *) array, size, sizeof( union dfaacc_union ) ) #define allocate_character_array(size) \ (char *) allocate_array( size, sizeof( char ) ) #define reallocate_character_array(array,size) \ (char *) reallocate_array( (void *) array, size, sizeof( char ) ) #define allocate_Character_array(size) \ (Char *) allocate_array( size, sizeof( Char ) ) #define reallocate_Character_array(array,size) \ (Char *) reallocate_array( (void *) array, size, sizeof( Char ) ) /* Used to communicate between scanner and parser. The type should really * be YYSTYPE, but we can't easily get our hands on it. */ extern int yylval; /* External functions that are cross-referenced among the flex source files. */ /* from file ccl.c */ extern void ccladd PROTO((int, int)); /* add a single character to a ccl */ extern int cclinit PROTO((void)); /* make an empty ccl */ extern void cclnegate PROTO((int)); /* negate a ccl */ /* List the members of a set of characters in CCL form. */ extern void list_character_set PROTO((FILE*, int[])); /* from file dfa.c */ /* Check a DFA state for backing up. */ extern void check_for_backing_up PROTO((int, int[])); /* Check to see if NFA state set constitutes "dangerous" trailing context. */ extern void check_trailing_context PROTO((int*, int, int*, int)); /* Construct the epsilon closure of a set of ndfa states. */ extern int *epsclosure PROTO((int*, int*, int[], int*, int*)); /* Increase the maximum number of dfas. */ extern void increase_max_dfas PROTO((void)); extern void ntod PROTO((void)); /* convert a ndfa to a dfa */ /* Converts a set of ndfa states into a dfa state. */ extern int snstods PROTO((int[], int, int[], int, int, int*)); /* from file ecs.c */ /* Convert character classes to set of equivalence classes. */ extern void ccl2ecl PROTO((void)); /* Associate equivalence class numbers with class members. */ extern int cre8ecs PROTO((int[], int[], int)); /* Update equivalence classes based on character class transitions. */ extern void mkeccl PROTO((Char[], int, int[], int[], int, int)); /* Create equivalence class for single character. */ extern void mkechar PROTO((int, int[], int[])); /* from file gen.c */ extern void do_indent PROTO((void)); /* indent to the current level */ /* Generate the code to keep backing-up information. */ extern void gen_backing_up PROTO((void)); /* Generate the code to perform the backing up. */ extern void gen_bu_action PROTO((void)); /* Generate full speed compressed transition table. */ extern void genctbl PROTO((void)); /* Generate the code to find the action number. */ extern void gen_find_action PROTO((void)); extern void genftbl PROTO((void)); /* generate full transition table */ /* Generate the code to find the next compressed-table state. */ extern void gen_next_compressed_state PROTO((char*)); /* Generate the code to find the next match. */ extern void gen_next_match PROTO((void)); /* Generate the code to find the next state. */ extern void gen_next_state PROTO((int)); /* Generate the code to make a NUL transition. */ extern void gen_NUL_trans PROTO((void)); /* Generate the code to find the start state. */ extern void gen_start_state PROTO((void)); /* Generate data statements for the transition tables. */ extern void gentabs PROTO((void)); /* Write out a formatted string at the current indentation level. */ extern void indent_put2s PROTO((char[], char[])); /* Write out a string + newline at the current indentation level. */ extern void indent_puts PROTO((char[])); extern void make_tables PROTO((void)); /* generate transition tables */ /* from file main.c */ extern void check_options PROTO((void)); extern void flexend PROTO((int)); extern void usage PROTO((void)); /* from file misc.c */ /* Add a #define to the action file. */ extern void action_define PROTO(( char *defname, int value )); /* Add the given text to the stored actions. */ extern void add_action PROTO(( char *new_text )); /* True if a string is all lower case. */ extern int all_lower PROTO((register char *)); /* True if a string is all upper case. */ extern int all_upper PROTO((register char *)); /* Bubble sort an integer array. */ extern void bubble PROTO((int [], int)); /* Check a character to make sure it's in the expected range. */ extern void check_char PROTO((int c)); /* Replace upper-case letter to lower-case. */ extern Char clower PROTO((int)); /* Returns a dynamically allocated copy of a string. */ extern char *copy_string PROTO((register const char *)); /* Returns a dynamically allocated copy of a (potentially) unsigned string. */ extern Char *copy_unsigned_string PROTO((register Char *)); /* Shell sort a character array. */ extern void cshell PROTO((Char [], int, int)); /* Finish up a block of data declarations. */ extern void dataend PROTO((void)); /* Flush generated data statements. */ extern void dataflush PROTO((void)); /* Report an error message and terminate. */ extern void flexerror PROTO((const char[])); /* Report a fatal error message and terminate. */ extern void flexfatal PROTO((const char[])); /* Convert a hexadecimal digit string to an integer value. */ extern int htoi PROTO((Char[])); /* Report an error message formatted with one integer argument. */ extern void lerrif PROTO((const char[], int)); /* Report an error message formatted with one string argument. */ extern void lerrsf PROTO((const char[], const char[])); /* Spit out a "#line" statement. */ extern void line_directive_out PROTO((FILE*, int)); /* Mark the current position in the action array as the end of the section 1 * user defs. */ extern void mark_defs1 PROTO((void)); /* Mark the current position in the action array as the end of the prolog. */ extern void mark_prolog PROTO((void)); /* Generate a data statment for a two-dimensional array. */ extern void mk2data PROTO((int)); extern void mkdata PROTO((int)); /* generate a data statement */ /* Return the integer represented by a string of digits. */ extern int myctoi PROTO((char [])); /* Return character corresponding to escape sequence. */ extern Char myesc PROTO((Char[])); /* Convert an octal digit string to an integer value. */ extern int otoi PROTO((Char [] )); /* Output a (possibly-formatted) string to the generated scanner. */ extern void out PROTO((const char [])); extern void out_dec PROTO((const char [], int)); extern void out_dec2 PROTO((const char [], int, int)); extern void out_hex PROTO((const char [], unsigned int)); extern void out_line_count PROTO((const char [])); extern void out_str PROTO((const char [], const char [])); extern void out_str3 PROTO((const char [], const char [], const char [], const char [])); extern void out_str_dec PROTO((const char [], const char [], int)); extern void outc PROTO((int)); extern void outn PROTO((const char [])); /* Return a printable version of the given character, which might be * 8-bit. */ extern char *readable_form PROTO((int)); /* Write out one section of the skeleton file. */ extern void skelout PROTO((void)); /* Output a yy_trans_info structure. */ extern void transition_struct_out PROTO((int, int)); /* Only needed when using certain broken versions of bison to build parse.c. */ extern void *yy_flex_xmalloc PROTO(( int )); /* Set a region of memory to 0. */ extern void zero_out PROTO((char *, size_t)); /* from file nfa.c */ /* Add an accepting state to a machine. */ extern void add_accept PROTO((int, int)); /* Make a given number of copies of a singleton machine. */ extern int copysingl PROTO((int, int)); /* Debugging routine to write out an nfa. */ extern void dumpnfa PROTO((int)); /* Finish up the processing for a rule. */ extern void finish_rule PROTO((int, int, int, int)); /* Connect two machines together. */ extern int link_machines PROTO((int, int)); /* Mark each "beginning" state in a machine as being a "normal" (i.e., * not trailing context associated) state. */ extern void mark_beginning_as_normal PROTO((register int)); /* Make a machine that branches to two machines. */ extern int mkbranch PROTO((int, int)); extern int mkclos PROTO((int)); /* convert a machine into a closure */ extern int mkopt PROTO((int)); /* make a machine optional */ /* Make a machine that matches either one of two machines. */ extern int mkor PROTO((int, int)); /* Convert a machine into a positive closure. */ extern int mkposcl PROTO((int)); extern int mkrep PROTO((int, int, int)); /* make a replicated machine */ /* Create a state with a transition on a given symbol. */ extern int mkstate PROTO((int)); extern void new_rule PROTO((void)); /* initialize for a new rule */ /* from file parse.y */ /* Build the "<>" action for the active start conditions. */ extern void build_eof_action PROTO((void)); /* Write out a message formatted with one string, pinpointing its location. */ extern void format_pinpoint_message PROTO((char[], char[])); /* Write out a message, pinpointing its location. */ extern void pinpoint_message PROTO((char[])); /* Write out a warning, pinpointing it at the given line. */ extern void line_warning PROTO(( char[], int )); /* Write out a message, pinpointing it at the given line. */ extern void line_pinpoint PROTO(( char[], int )); /* Report a formatted syntax error. */ extern void format_synerr PROTO((char [], char[])); extern void synerr PROTO((char [])); /* report a syntax error */ extern void format_warn PROTO((char [], char[])); extern void warn PROTO((char [])); /* report a warning */ extern void yyerror PROTO((char [])); /* report a parse error */ extern int yyparse PROTO((void)); /* the YACC parser */ /* from file scan.l */ /* The Flex-generated scanner for flex. */ extern int flexscan PROTO((void)); /* Open the given file (if NULL, stdin) for scanning. */ extern void set_input_file PROTO((char*)); /* Wrapup a file in the lexical analyzer. */ extern int yywrap PROTO((void)); /* from file sym.c */ /* Add symbol and definitions to symbol table. */ extern int addsym PROTO((register char[], char*, int, hash_table, int)); /* Save the text of a character class. */ extern void cclinstal PROTO ((Char [], int)); /* Lookup the number associated with character class. */ extern int ccllookup PROTO((Char [])); /* Find symbol in symbol table. */ extern struct hash_entry *findsym PROTO((register char[], hash_table, int )); extern void ndinstal PROTO((char[], Char[])); /* install a name definition */ extern Char *ndlookup PROTO((char[])); /* lookup a name definition */ /* Increase maximum number of SC's. */ extern void scextend PROTO((void)); extern void scinstal PROTO((char[], int)); /* make a start condition */ /* Lookup the number associated with a start condition. */ extern int sclookup PROTO((char[])); /* from file tblcmp.c */ /* Build table entries for dfa state. */ extern void bldtbl PROTO((int[], int, int, int, int)); extern void cmptmps PROTO((void)); /* compress template table entries */ extern void expand_nxt_chk PROTO((void)); /* increase nxt/chk arrays */ /* Finds a space in the table for a state to be placed. */ extern int find_table_space PROTO((int*, int)); extern void inittbl PROTO((void)); /* initialize transition tables */ /* Make the default, "jam" table entries. */ extern void mkdeftbl PROTO((void)); /* Create table entries for a state (or state fragment) which has * only one out-transition. */ extern void mk1tbl PROTO((int, int, int, int)); /* Place a state into full speed transition table. */ extern void place_state PROTO((int*, int, int)); /* Save states with only one out-transition to be processed later. */ extern void stack1 PROTO((int, int, int, int)); /* from file yylex.c */ extern int yylex PROTO((void));